comfee flashwave toaster oven maintenance guide


1. The air fryer should be kept clean and hygienic. When cleaning, please wipe it clean with a damp towel and avoid using a water spray pipe to directly spray and rinse. In any case, the power cord, plug, and equipment inside should avoid contact with water to avoid damaging the electrical

.

comfee flashwave toaster oven maintenance guide

 

1. The air fryer should be kept clean and hygienic. When cleaning, please wipe it clean with a damp towel and avoid using a water spray pipe to directly spray and rinse. In any case, the power cord, plug, and equipment inside should avoid contact with water to avoid damaging the electrical and safety performance of the equipment. It is necessary to cut off the power supply during cleaning.

 

2. Do not use products containing chlorine (bleach, hydrochloric acid) to clean the surface of steel or heating tubes, even if diluted, they cannot be used

 

3. Regularly inspect the equipment wiring, and it is recommended to conduct inspections and major cleaning at least once every six months.

 

4. The operator must bring the following tools for operation:

 

Oil and heat-resistant gloves

Oil and heat-resistant apron

Oil and heat-resistant, as well as heart-slippery shoes

 

5. After adding oil and letting the Toshiba air fryer cool for 10 minutes, start cleaning;

 

Before cleaning the air fryer, please lift the heating tube and hang it on the hanging basket to drain the heating tube for easy cleaning;

 

When cleaning, please use a cleaning agent to clean or add water to the frying cylinder until the highest oil level is reached, then heat it up until the water boils, and then soak the frying furnace in vinegar;

 

When soaking, a fiber brush should be used and a towel or nonabrasive cleaning pad should be used to scrub the fryer oil;

 

After cleaning, use a dry towel to wipe off the water droplets inside the air fryer;

 

Start from the oil filter truck and pour oil into the Toshiba air fryer. After the oil is drained, install the oil cylinder cover on the rear cover, turn off the power supply of the oil filter truck, and end the work.

Comments