engraving lasers use steps detailed
1. Preparation
engraving lasers needs to be controlled by a computer, so you first need to prepare a computer and the corresponding software. At the same time, it is also necessary to prepare a piece of material to be carved, such as wood, leather, plastic, etc., and the necessary safety equipment, such as goggles.
Second, software installation
There are a number of engraving lasers software on the market to choose from, common LaserGRBL, T2 Laser and so on. Select the appropriate software according to the laser engraving model number used, and install according to the installation prompts provided by the software.
3. File import
After installing the engraving lasers software, you need to import the files to be carved into the software. Common file formats include JPG, BMP, and DXF. When importing files, you need to set the cutting depth and cutting speed as required.
Fourth, equipment adjustment
After importing the file and setting it, you need to adjust the device. Common equipment adjustment includes focal length adjustment, mirror adjustment and so on. Focal length adjustment refers to the need to adjust the lens position of the engraving lasers to ensure that the laser can be shot on the surface of the material to be carved. Mirror adjustment refers to the need to adjust the position and Angle of each mirror so that the laser can be directed to the correct position.
5. Start carving
After the equipment adjustment is completed, you can begin to carve. It is necessary to pay attention to safety measures when carving, such as wearing safety goggles. In addition, it is necessary to carry out regular maintenance and maintenance of the machine to extend the service life of the engraving lasers.
The above is the use of engraving lasers steps, through the material preparation, software installation, file import and equipment adjustment steps, you can easily use engraving lasers to create. In the use of the process need to pay attention to safety, timely maintenance and maintenance, in order to ensure the long-term use of engraving lasers.
